I would like to purchase FSForce but I am not getting any feedback once off the runway. I am assuming that this joystick should work fine. I get all of the forces in FS and I get all of the forces when running ForceTest. When running FSForce though, I get some forces on the ground (a very small rumbling affect and the joystick initially goes forward) but once in the air nothing.
I bought the Cyborg Evo Force over the Logitech Force 3D Pro joystick. I hope I made the right choice. I have heard so many good things about this program so I would like to get it to work. Does activation turn on something that I am missing?
I am using the demo program and taking off from KSEA. I am flying the Cessna. As I said, I do get feedback while in the air with FS so I assume that I should get feedback in the air using FS Force.
Thanks,
Scott
No forces in air for Saitek Cyborg Evo Force
Moderator: RussDirks
- Make sure all your driver software is up-to-date (joystick, video, sound).
- It you exit and restart FSForce while in the air, does that help?
- Edit your profile to set the centering force at 100%, just in case it is too weak that you're just not feeling it.
- Configure FSForce to produce a log file (FS Force Log File) and then do a flight to see if anything turns up there.
- It you exit and restart FSForce while in the air, does that help?
- Edit your profile to set the centering force at 100%, just in case it is too weak that you're just not feeling it.
- Configure FSForce to produce a log file (FS Force Log File) and then do a flight to see if anything turns up there.
Russel Dirks
Forum Moderator
Forum Moderator
Cyborg Evo Force
Thank you for the quick reply. All of my drivers are up to date, I exited and restarted FSForce while in the air, and there were no errors in the log file.
I did max out the aileron and elevator centering forces across all speeds for a custom profile that I set up. I also maxed out the cornering force.
I did detect the force at that point. For instant if I set trim to 100 percent, it was somewhat harder to push forward on the stick.
I thought that the forces would be more pronounced. I don't know if forces are more pronounced on other joysticks, especially for the control surfaces.
I will keep playing around with it to see if I want to purchase or not.
Thanks for your help,
Scott
I did max out the aileron and elevator centering forces across all speeds for a custom profile that I set up. I also maxed out the cornering force.
I did detect the force at that point. For instant if I set trim to 100 percent, it was somewhat harder to push forward on the stick.
I thought that the forces would be more pronounced. I don't know if forces are more pronounced on other joysticks, especially for the control surfaces.
I will keep playing around with it to see if I want to purchase or not.
Thanks for your help,
Scott