Page 1 of 1

Spinning RA Marchetti

Posted: Mon Jan 05, 2004 5:50 pm
by Eagle
One of the planes that benefits the most by FS Force in my opinion is the Realair SIAI Marchetti . The plane has a very "live" feeling, and now with proper forces has become even better!

But it wan't spin anymore, probably because of the FS Force influences on trim. Have anyone managed to spin the Marchetti with FS Force? In that case tips are highly appreciated!

(MS FF2)

Best,
Eagle

Posted: Wed Jan 07, 2004 2:19 am
by hm
Hi Eagle,

The SF260 spins with FS-FORCE on: Trottele closed, Full up, Full rudder right or left, no ailerons, and she spins. Well Now I love my SF260 even more. Russel did a nice job isn't :D .

hm

Posted: Wed Jan 07, 2004 2:39 am
by RussDirks
Remember that FS Force relays your trim commands to the old MSFS trim system when you're on the ground, but as soon as you lift off, that stops which means the MSFS trim system will be in the take-off position for the duration of the flight. For most flight operations this will be of no consequence, but for something as delicate as a spin, it may be what is causing your problem. You can fix it though, by using your keyboard trim commands (which are still connected to the old MSFS trim system, if you followed the suggestions in the readme) to position the MSFS trim system to approximately where it would have been if you weren't using FS Force. That may make it easier to spin.

Posted: Thu Jan 08, 2004 4:43 am
by Eagle
Thanks a lot guys, as you can see, I'm back in business!

Image

Don't know what did the trick, but your advices sure did help a lot. This is what I did.

Fuel: 15% in extra and 50% in mains
Istructor: On vacation
Trim FS9 (keyboard): Slightly above neutral
Trim FS Force (joystick): 0

Voila!

Best,
Eagle