Discussions and general chat
Moderator: RussDirks
-
bandito
- Posts: 2
- Joined: Tue Feb 20, 2007 3:52 am
Post
by bandito » Tue Feb 20, 2007 3:56 am
Hello guys,
I've got a Logitech Wingman Force 3D and using FSForce with FS9. Everything is set accordingly to manual. Even though, when I start any flight, there is an unintended movement of my joystick. Each one second it moves up and down.
What could be a problem? Thanks in advance!
-
RussDirks
- Site Admin
- Posts: 696
- Joined: Sat Sep 13, 2003 1:18 pm
- Location: Chilliwack, Canada
Post
by RussDirks » Tue Feb 20, 2007 7:33 am
Did you disable force feedback in FS9? That is usually why you get that behavior.
Russel Dirks
Forum Moderator
-
bandito
- Posts: 2
- Joined: Tue Feb 20, 2007 3:52 am
Post
by bandito » Tue Feb 20, 2007 6:24 pm
Of course I did.
I've done everything what is written in manual - disable force feedback in FS9, remove TRIM buttons from joystick.
It still persists.
-
RussDirks
- Site Admin
- Posts: 696
- Joined: Sat Sep 13, 2003 1:18 pm
- Location: Chilliwack, Canada
Post
by RussDirks » Wed Feb 21, 2007 7:24 am
Do any of the intentional forces work, like pavement grooves, braking force, centering force (when at high airspeed)? There could be some sort of driver conflict.
Russel Dirks
Forum Moderator