Discussions and general chat
Moderator: RussDirks
-
simbiosi
- Posts: 6
- Joined: Mon Dec 04, 2017 9:48 pm
Post
by simbiosi » Tue Dec 05, 2017 12:13 am
Hi
I use this tool since FSX and never got any trouble, I have installed under Win7pro/64bit FSX stem edition(installed without fsx so fsx old logic folder) and P3Dv4.
The other day I attach an xcontroller F710 and I don't know why but the q400 got messup with key and axis.
So I rebuild the Standard.XML of P3dv4 and fixed the problem but FSforce loose the connection with the GUID of my Cyborg Evo Force.
So uninstall the fsforce and reintall it, but I got strange error on the procedure of installing it.
The installation in any case go ahead by installing the software there is a mistake on adding the xml line on the exe.xml of FSX.
When you open the profile manager there is this error.
If I add manually the code, it dosen't matter I still getting the error, but in the mean time I notice that it broke the exe.xml file by adding a blank line after </SimBase.Document>.
thank's
Fabrizio
-
RussDirks
- Site Admin
- Posts: 696
- Joined: Sat Sep 13, 2003 1:18 pm
- Location: Chilliwack, Canada
Post
by RussDirks » Tue Dec 05, 2017 12:34 am
The XML code in your 'exe.xml' file is malformed, and the FS Force installer can't work with it. XML files are simple text files, so you can open it and look on line 41 to see where the error is. Based on the message, there is probably a missing </Launch.Addon> tag. If you can't fix it yourself, post the contents of the exe.xml file here and I will have a look at it.
Russel Dirks
Forum Moderator
-
simbiosi
- Posts: 6
- Joined: Mon Dec 04, 2017 9:48 pm
Post
by simbiosi » Tue Dec 05, 2017 12:49 am
Really sorry you are right the logitech plugin messup the EXE.xml not closing a </Launch.Addon> I am using Notepad++ end normally with color it show error.
Sorry to bother and thank's for the quick reply and support.
Best regards
-
simbiosi
- Posts: 6
- Joined: Mon Dec 04, 2017 9:48 pm
Post
by simbiosi » Tue Dec 05, 2017 5:37 am
I think I speack to early, now after boot p3dv4 I got:
but in FSForce Profile I can set trim and brake button!
on FSForce.cfg there is a guid of a joystick the only think that puzzle me is, the P3D controller list there is a FFB5 instead of saitek cyborg evo as metion also on the FSForce Profile.
these are the controller in Standard.xml Saitek Cyborg Evo Force {15C9DE50-5D1F-11E7-8001-444553540000}
FFB5 {FFB506A3-0205-0001-D5B5-020000000000}
Code: Select all
[General]
TrimClickAmount=100
TrimIndicator=1
PauseOnTaskSwitch=0
dwStartDelay=0
DemoAreaInfo=1
JoystickTrimUp=Rev1:Button:Saitek Cyborg Evo Force:{15C9DE50-5D1F-11E7-8001-444553540000}:3
JoystickTrimDown=Rev1:Button:Saitek Cyborg Evo Force:{15C9DE50-5D1F-11E7-8001-444553540000}:2
Brakes=Rev1:Button:Saitek Cyborg Evo Force:{15C9DE50-5D1F-11E7-8001-444553540000}:0
PMWndPos=1845,496
Code: Select all
<?xml version="1.0" encoding="UTF-8"?>
<SimBase.Document Type="Controls" version="4,1" id="Standard">
<Descr>Controls Mapping File</Descr>
<Filename>Standard.xml</Filename>
<SimControls.Map>
<Name>KEYBOARD_MAIN.Native</Name>
</SimControls.Map>
<SimControls.Map>
<Name>KEYBOARD_SLEW</Name>
<Entry>
<Key>F2</Key>
<Down>SLEW_ALTIT_FREEZE</Down>
</Entry>
<Entry>
<Key>F8</Key>
<Down>SLEW_PITCH_DN_FAST</Down>
</Entry>
<Entry>
<Key>SHIFT+X</Key>
<Down>MOUSE_AS_YOKE_TOGGLE</Down>
</Entry>
<Entry>
<Key>Z</Key>
<Down>SLEW_ALTIT_MINUS</Down>
</Entry>
<Entry>
<Key>Y</Key>
<Down>SLEW_TOGGLE</Down>
</Entry>
<Entry>
<Key>P</Key>
<Down>PAUSE_TOGGLE</Down>
</Entry>
<Entry>
<Key>0</Key>
<Down>SLEW_PITCH_MINUS</Down>
</Entry>
<Entry>
<Key>F4</Key>
<Down>SLEW_ALTIT_UP_FAST</Down>
</Entry>
<Entry>
<Key>F3</Key>
<Down>SLEW_ALTIT_UP_SLOW</Down>
</Entry>
<Entry>
<Key>F1</Key>
<Down>SLEW_ALTIT_DN_FAST</Down>
</Entry>
<Entry>
<Key>Q</Key>
<Down>SLEW_ALTIT_PLUS</Down>
</Entry>
<Entry>
<Key>F7</Key>
<Down>SLEW_PITCH_DN_SLOW</Down>
</Entry>
<Entry>
<Key>F6</Key>
<Down>SLEW_PITCH_FREEZE</Down>
</Entry>
<Entry>
<Key>F5</Key>
<Down>SLEW_PITCH_UP_FAST</Down>
</Entry>
<Entry>
<Key>9</Key>
<Down>SLEW_PITCH_PLUS</Down>
</Entry>
<Entry>
<Key>CTRL+Space</Key>
<Down>SLEW_RESET</Down>
</Entry>
<Entry>
<Key>SHIFT+Z</Key>
<Down>READOUTS_SLEW</Down>
</Entry>
<Entry>
<Key>Num_7</Key>
<Down>SLEW_BANK_MINUS</Down>
</Entry>
<Entry>
<Key>Num_8</Key>
<Down>SLEW_AHEAD_PLUS</Down>
</Entry>
<Entry>
<Key>Num_9</Key>
<Down>SLEW_BANK_PLUS</Down>
</Entry>
<Entry>
<Key>Num_4</Key>
<Down>SLEW_LEFT</Down>
</Entry>
<Entry>
<Key>Num_5</Key>
<Down>SLEW_FREEZE</Down>
</Entry>
<Entry>
<Key>Num_6</Key>
<Down>SLEW_RIGHT</Down>
</Entry>
<Entry>
<Key>Num_1</Key>
<Down>SLEW_HEADING_MINUS</Down>
</Entry>
<Entry>
<Key>Num_2</Key>
<Down>SLEW_AHEAD_MINUS</Down>
</Entry>
<Entry>
<Key>Num_3</Key>
<Down>SLEW_HEADING_PLUS</Down>
</Entry>
<Entry>
<Key>CTRL+Enter</Key>
<Down>EYEPOINT_BACK</Down>
</Entry>
<Entry>
<Key>A</Key>
<Down>NEXT_SUB_VIEW</Down>
</Entry>
<Entry>
<Key>CTRL+SHIFT+L</Key>
<Down>TOGGLE_AIRCRAFT_LABELS</Down>
</Entry>
<Entry>
<Key>Esc</Key>
<Down>USER_INTERRUPT</Down>
</Entry>
<Entry>
<Key>SHIFT+Enter</Key>
<Down>EYEPOINT_UP</Down>
</Entry>
<Entry>
<Key>SHIFT+Backspace</Key>
<Down>EYEPOINT_DOWN</Down>
</Entry>
<Entry>
<Key>CTRL+SHIFT+Enter</Key>
<Down>EYEPOINT_RIGHT</Down>
</Entry>
<Entry>
<Key>CTRL+SHIFT+Backspace</Key>
<Down>EYEPOINT_LEFT</Down>
</Entry>
<Entry>
<Key>CTRL+Backspace</Key>
<Down>EYEPOINT_FORWARD</Down>
</Entry>
<Entry>
<Key>Space</Key>
<Down>MOUSE_LOOK_TOGGLE</Down>
<DownVal>1</DownVal>
<Up>MOUSE_LOOK_TOGGLE</Up>
<UpVal>2</UpVal>
</Entry>
<Entry>
<Key>CTRL+SHIFT+D</Key>
<Down>MOUSE_LOOK_TOGGLE</Down>
</Entry>
<Entry>
<Key>CTRL+SHIFT+I</Key>
<Down>YAXIS_INVERT_TOGGLE</Down>
</Entry>
</SimControls.Map>
<SimControls.Map>
<Name>KEYBOARD_OBSERVE</Name>
<Entry>
<Key>VK_ADD</Key>
<Down>OBSERVER_ZOOM_IN</Down>
</Entry>
<Entry>
<Key>Space</Key>
<Down>OBSERVER_MOUSE_LOOK_TOGGLE</Down>
<DownVal>1</DownVal>
<Up>OBSERVER_MOUSE_LOOK_TOGGLE</Up>
<UpVal>2</UpVal>
</Entry>
<Entry>
<Key>SHIFT+Num_Del</Key>
<Down>OBSERVER_RESET</Down>
</Entry>
<Entry>
<Key>SHIFT+Num_4</Key>
<Down>OBSERVER_YAW_LEFT</Down>
</Entry>
<Entry>
<Key>Num_9</Key>
<Down>OBSERVER_WORLD_MOVE_UP</Down>
</Entry>
<Entry>
<Key>Num_2</Key>
<Down>OBSERVER_WORLD_MOVE_BACK</Down>
</Entry>
<Entry>
<Key>Num_6</Key>
<Down>OBSERVER_WORLD_MOVE_RIGHT</Down>
</Entry>
<Entry>
<Key>Num_8</Key>
<Down>OBSERVER_WORLD_MOVE_FORWARD</Down>
</Entry>
<Entry>
<Key>Num_3</Key>
<Down>OBSERVER_WORLD_MOVE_DOWN</Down>
</Entry>
<Entry>
<Key>VK_SUBTRACT</Key>
<Down>OBSERVER_ZOOM_OUT</Down>
</Entry>
<Entry>
<Key>SHIFT+Num_6</Key>
<Down>OBSERVER_YAW_RIGHT</Down>
</Entry>
<Entry>
<Key>SHIFT+Num_8</Key>
<Down>OBSERVER_PITCH_UP</Down>
</Entry>
<Entry>
<Key>SHIFT+Num_2</Key>
<Down>OBSERVER_PITCH_DOWN</Down>
</Entry>
<Entry>
<Key>SHIFT+Num_1</Key>
<Down>OBSERVER_ROLL_LEFT</Down>
</Entry>
<Entry>
<Key>SHIFT+Num_3</Key>
<Down>OBSERVER_ROLL_RIGHT</Down>
</Entry>
<Entry>
<Key>SHIFT+Num_0</Key>
<Down>OBSERVER_ROTATION_TOGGLE</Down>
</Entry>
<Entry>
<Key>Num_4</Key>
<Down>OBSERVER_WORLD_MOVE_LEFT</Down>
</Entry>
</SimControls.Map>
<SimControls.Map>
<Name>KEYBOARD_SIMDIRECTOR</Name>
<Entry>
<Key>F10</Key>
<Down>SIMDIRECTOR_TOGGLE_BACKSTAGE</Down>
</Entry>
<Entry>
<Key>CTRL+E</Key>
<Down>SIMDIRECTOR_EXPORT</Down>
</Entry>
<Entry>
<Key>CTRL+T</Key>
<Down>SIMDIRECTOR_CENTER_ON_OBJECTS</Down>
</Entry>
<Entry>
<Key>S</Key>
<Down>SIMDIRECTOR_GIZMO_NONE</Down>
</Entry>
<Entry>
<Key>F8</Key>
<Down>SIMDIRECTOR_MISSION_PREVIEW_MODE</Down>
</Entry>
<Entry>
<Key>F11</Key>
<Down>SIMDIRECTOR_OPEN_SCENARIO_PROPERTIES</Down>
</Entry>
<Entry>
<Key>4</Key>
<Down>SIMDIRECTOR_CONTROLMODE_DRAW</Down>
</Entry>
<Entry>
<Key>CTRL+Enter</Key>
<Down>SIMDIRECTOR_STAGING_COMMIT_ALL_CHANGES</Down>
</Entry>
<Entry>
<Key>1</Key>
<Down>SIMDIRECTOR_CONTROLMODE_NONE</Down>
</Entry>
<Entry>
<Key>CTRL+V</Key>
<Down>SIMDIRECTOR_DUPLICATE_OBJECTS</Down>
</Entry>
<Entry>
<Key>CTRL+F3</Key>
<Down>SIMDIRECTOR_SELECT_PREVIOUS_SELECTED_OBJECT</Down>
</Entry>
<Entry>
<Key>Esc</Key>
<Down>SIMDIRECTOR_DESELECT_ALL_OBJECTS</Down>
</Entry>
<Entry>
<Key>5</Key>
<Down>SIMDIRECTOR_TOGGLE_STAGING_MODE</Down>
</Entry>
<Entry>
<Key>W</Key>
<Down>SIMDIRECTOR_GIZMO_TRANSLATE</Down>
</Entry>
<Entry>
<Key>CTRL+SHIFT+E</Key>
<Down>SIMDIRECTOR_EXPORT_GROUP</Down>
</Entry>
<Entry>
<Key>CTRL+A</Key>
<Down>SIMDIRECTOR_SELECT_ALL_OBJECTS</Down>
</Entry>
<Entry>
<Key>CTRL+O</Key>
<Down>SIMDIRECTOR_OPEN_MISSION</Down>
</Entry>
<Entry>
<Key>R</Key>
<Down>SIMDIRECTOR_GIZMO_SCALE</Down>
</Entry>
<Entry>
<Key>3</Key>
<Down>SIMDIRECTOR_CONTROLMODE_MEASURE</Down>
</Entry>
<Entry>
<Key>CTRL+Z</Key>
<Down>SIMDIRECTOR_UNDO</Down>
</Entry>
<Entry>
<Key>CTRL+SHIFT+1</Key>
<Down>SIMDIRECTOR_TOGGLE_VISUALIZATION</Down>
</Entry>
<Entry>
<Key>Num_Del</Key>
<Down>SIMDIRECTOR_DELETE_OBJECTS</Down>
</Entry>
<Entry>
<Key>CTRL+G</Key>
<Down>SIMDIRECTOR_GROUP_OBJECTS</Down>
</Entry>
<Entry>
<Key>CTRL+SHIFT+5</Key>
<Down>SIMDIRECTOR_TOGGLE_PREPAR3D</Down>
</Entry>
<Entry>
<Key>CTRL+U</Key>
<Down>SIMDIRECTOR_UNGROUP_OBJECTS</Down>
</Entry>
<Entry>
<Key>CTRL+SHIFT+S</Key>
<Down>SIMDIRECTOR_SAVE_MISSION_AS</Down>
</Entry>
<Entry>
<Key>CTRL+N</Key>
<Down>SIMDIRECTOR_NEW_SCENARIO</Down>
</Entry>
<Entry>
<Key>CTRL+S</Key>
<Down>SIMDIRECTOR_SAVE_MISSION</Down>
</Entry>
<Entry>
<Key>CTRL+I</Key>
<Down>SIMDIRECTOR_IMPORT</Down>
</Entry>
<Entry>
<Key>E</Key>
<Down>SIMDIRECTOR_GIZMO_ROTATE</Down>
</Entry>
<Entry>
<Key>CTRL+SHIFT+3</Key>
<Down>SIMDIRECTOR_TOGGLE_OBJECT_PROPERTIES</Down>
</Entry>
<Entry>
<Key>CTRL+SHIFT+4</Key>
<Down>SIMDIRECTOR_TOGGLE_CATALOG</Down>
</Entry>
<Entry>
<Key>CTRL+SHIFT+2</Key>
<Down>SIMDIRECTOR_TOGGLE_OBJECTS</Down>
</Entry>
<Entry>
<Key>CTRL+SHIFT+6</Key>
<Down>SIMDIRECTOR_TOGGLE_VALIDATION</Down>
</Entry>
<Entry>
<Key>CTRL+SHIFT+7</Key>
<Down>SIMDIRECTOR_TOGGLE_CATALOG_PREVIEW</Down>
</Entry>
<Entry>
<Key>F6</Key>
<Down>SIMDIRECTOR_VIRTUAL_INSTRUCTOR_MODE</Down>
</Entry>
<Entry>
<Key>F7</Key>
<Down>SIMDIRECTOR_FLIGHT_INSTRUCTOR_MODE</Down>
</Entry>
<Entry>
<Key>F5</Key>
<Down>SIMDIRECTOR_WORLD_EDITOR_MODE</Down>
</Entry>
<Entry>
<Key>CTRL+SHIFT+V</Key>
<Down>SIMDIRECTOR_VALIDATE_MISSION</Down>
</Entry>
<Entry>
<Key>CTRL+F4</Key>
<Down>SIMDIRECTOR_SELECT_NEXT_SELECTED_OBJECT</Down>
</Entry>
<Entry>
<Key>F1</Key>
<Down>SIMDIRECTOR_HELP</Down>
</Entry>
<Entry>
<Key>F12</Key>
<Down>SIMDIRECTOR_SETTINGS</Down>
</Entry>
<Entry>
<Key>VK_ADD</Key>
<Down>SIMDIRECTOR_ZOOM_IN</Down>
</Entry>
<Entry>
<Key>VK_SUBTRACT</Key>
<Down>SIMDIRECTOR_ZOOM_OUT</Down>
</Entry>
<Entry>
<Key>CTRL+Y</Key>
<Down>SIMDIRECTOR_REDO</Down>
</Entry>
<Entry>
<Key>2</Key>
<Down>SIMDIRECTOR_CONTROLMODE_WAYPOINT</Down>
</Entry>
<Entry>
<Key>F9</Key>
<Down>SIMDIRECTOR_OPERATOR_MODE</Down>
</Entry>
</SimControls.Map>
<SimControls.Map>
<Name>KEYBOARD_CINEMATOGRAPHER</Name>
<Entry>
<Key>S</Key>
<Down>EYEPOINT_BACK</Down>
</Entry>
<Entry>
<Key>E</Key>
<Down>EYEPOINT_UP</Down>
</Entry>
<Entry>
<Key>Q</Key>
<Down>EYEPOINT_DOWN</Down>
</Entry>
<Entry>
<Key>D</Key>
<Down>EYEPOINT_RIGHT</Down>
</Entry>
<Entry>
<Key>A</Key>
<Down>EYEPOINT_LEFT</Down>
</Entry>
<Entry>
<Key>W</Key>
<Down>EYEPOINT_FORWARD</Down>
</Entry>
<Entry>
<Key>SHIFT+F5</Key>
<Down>CINEMATOGRAPHER_TOGGLE</Down>
</Entry>
</SimControls.Map>
<SimControls.Map>
<Name>Mouse Yoke</Name>
<Axis>
<AxName>XAxis</AxName>
<Index>0</Index>
<AxEvent>AXIS_AILERONS_SET</AxEvent>
<AxScale>64</AxScale>
<AxNull>36</AxNull>
</Axis>
<Axis>
<AxName>YAxis</AxName>
<Index>1</Index>
<AxEvent>AXIS_ELEVATOR_SET</AxEvent>
<AxScale>64</AxScale>
<AxNull>36</AxNull>
</Axis>
<Entry>
<Index>0</Index>
<Down>BRAKES</Down>
<DownRpt>1</DownRpt>
</Entry>
<Entry>
<Index>2</Index>
<Down>SLEW_RESET</Down>
</Entry>
<Entry>
<Index>3</Index>
<Down>FLAPS_INCR</Down>
</Entry>
<Entry>
<Index>4</Index>
<Down>FLAPS_DECR</Down>
</Entry>
<Entry>
<Index>6</Index>
<Down>THROTTLE_INCR</Down>
</Entry>
<Entry>
<Index>7</Index>
<Down>THROTTLE_DECR</Down>
</Entry>
</SimControls.Map>
<SimControls.Map>
<Name>Mouse Yoke SLEW</Name>
<Axis>
<AxName>XAxis</AxName>
<Index>0</Index>
<AxEvent>AXIS_SLEW_SIDEWAYS_SET</AxEvent>
<AxScale>100</AxScale>
<AxNull>36</AxNull>
</Axis>
<Axis>
<AxName>YAxis</AxName>
<Index>1</Index>
<AxEvent>AXIS_SLEW_AHEAD_SET</AxEvent>
<AxScale>100</AxScale>
<AxNull>36</AxNull>
</Axis>
<Entry>
<Index>0</Index>
<Down>SLEW_RESET</Down>
</Entry>
<Entry>
<Index>2</Index>
<Down>SLEW_FREEZE</Down>
</Entry>
<Entry>
<Index>3</Index>
<Down>SLEW_ALTIT_MINUS</Down>
<DownRpt>1</DownRpt>
</Entry>
<Entry>
<Index>4</Index>
<Down>SLEW_ALTIT_PLUS</Down>
<DownRpt>1</DownRpt>
</Entry>
<Entry>
<Index>6</Index>
<Down>SLEW_PITCH_DN_SLOW</Down>
<Up>SLEW_FREEZE</Up>
</Entry>
<Entry>
<Index>7</Index>
<Down>SLEW_PITCH_UP_SLOW</Down>
<Up>SLEW_FREEZE</Up>
</Entry>
</SimControls.Map>
<SimControls.Map>
<Name>Mouse Yoke OBSERVE</Name>
<Entry>
<Index>6</Index>
<Down>OBSERVER_ZOOM_IN</Down>
</Entry>
<Entry>
<Index>7</Index>
<Down>OBSERVER_ZOOM_OUT</Down>
</Entry>
</SimControls.Map>
<SimControls.Map>
<Name>Mouse Yoke SIMDIRECTOR</Name>
</SimControls.Map>
<SimControls.Map>
<Name>Mouse Yoke CINEMATOGRAPHER</Name>
<Axis>
<AxName>XAxis</AxName>
<Index>0</Index>
<AxEvent>EYEPOINT_MOVE_LATERAL</AxEvent>
<AxScale>64</AxScale>
<AxNull>64</AxNull>
</Axis>
<Axis>
<AxName>YAxis</AxName>
<Index>1</Index>
<AxEvent>EYEPOINT_MOVE_LONGITUDINAL</AxEvent>
<AxScale>-64</AxScale>
<AxNull>64</AxNull>
</Axis>
<Axis>
<AxName>RzAxis</AxName>
<Index>5</Index>
<AxEvent>EYEPOINT_MOVE_VERTICAL</AxEvent>
<AxScale>64</AxScale>
<AxNull>64</AxNull>
</Axis>
<POV>
<Index>0</Index>
<Down>PAN_VIEW</Down>
<DownRpt>1</DownRpt>
</POV>
</SimControls.Map>
<SimControls.Map>
<Name>Mouse Look</Name>
</SimControls.Map>
<SimControls.Map>
<Name>Mouse Look SLEW</Name>
</SimControls.Map>
<SimControls.Map>
<Name>Mouse Look OBSERVE</Name>
</SimControls.Map>
<SimControls.Map>
<Name>Mouse Look SIMDIRECTOR</Name>
</SimControls.Map>
<SimControls.Map>
<Name>Mouse Look CINEMATOGRAPHER</Name>
</SimControls.Map>
<SimControls.Map>
<Name>Xbox 360 Controller</Name>
</SimControls.Map>
<SimControls.Map>
<Name>Xbox 360 Controller SLEW</Name>
</SimControls.Map>
<SimControls.Map>
<Name>Xbox 360 Controller OBSERVE</Name>
</SimControls.Map>
<SimControls.Map>
<Name>Xbox 360 Controller SIMDIRECTOR</Name>
</SimControls.Map>
<SimControls.Map>
<Name>Xbox 360 Controller CINEMATOGRAPHER</Name>
<Axis>
<AxName>XAxis</AxName>
<Index>0</Index>
<AxEvent>EYEPOINT_MOVE_LATERAL</AxEvent>
<AxScale>64</AxScale>
<AxNull>64</AxNull>
</Axis>
<Axis>
<AxName>YAxis</AxName>
<Index>1</Index>
<AxEvent>EYEPOINT_MOVE_LONGITUDINAL</AxEvent>
<AxScale>64</AxScale>
<AxNull>64</AxNull>
</Axis>
<Axis>
<AxName>ZAxis</AxName>
<Index>2</Index>
<AxEvent>EYEPOINT_MOVE_VERTICAL</AxEvent>
<AxScale>64</AxScale>
<AxNull>64</AxNull>
</Axis>
<Axis>
<AxName>RxAxis</AxName>
<Index>3</Index>
<AxEvent>AXIS_ADJUST_HEADING</AxEvent>
<AxScale>64</AxScale>
<AxNull>64</AxNull>
</Axis>
<Axis>
<AxName>RyAxis</AxName>
<Index>4</Index>
<AxEvent>AXIS_ADJUST_PITCH</AxEvent>
<AxScale>-64</AxScale>
<AxNull>64</AxNull>
</Axis>
<Entry>
<Index>1</Index>
<Down>MINUS</Down>
<DownRpt>2</DownRpt>
</Entry>
<Entry>
<Index>3</Index>
<Down>PLUS</Down>
<DownRpt>2</DownRpt>
</Entry>
<Entry>
<Index>4</Index>
<Down>SMOOTH_EYEPOINT_RESET</Down>
</Entry>
<Entry>
<Index>5</Index>
<Down>SMOOTH_VIEW_ORIENTATION_RESET</Down>
</Entry>
<Entry>
<Index>8</Index>
<Down>PAUSE_TOGGLE</Down>
</Entry>
<Entry>
<Index>9</Index>
<Down>CINEMATOGRAPHER_TOGGLE</Down>
</Entry>
</SimControls.Map>
<SimControls.Map>
<Name>Saitek Pro Flight Rudder Pedals {1B73D920-5804-11E7-8006-444553540000}</Name>
<Axis>
<AxName>XAxis</AxName>
<Index>0</Index>
<AxEvent>AXIS_LEFT_BRAKE_SET</AxEvent>
<AxScale>-127</AxScale>
<AxNull>1</AxNull>
</Axis>
<Axis>
<AxName>YAxis</AxName>
<Index>1</Index>
<AxEvent>AXIS_RIGHT_BRAKE_SET</AxEvent>
<AxScale>-127</AxScale>
<AxNull>1</AxNull>
</Axis>
<Axis>
<AxName>RzAxis</AxName>
<Index>5</Index>
<AxEvent>AXIS_RUDDER_SET</AxEvent>
<AxScale>64</AxScale>
<AxNull>36</AxNull>
</Axis>
</SimControls.Map>
<SimControls.Map>
<Name>Saitek Pro Flight Rudder Pedals SLEW {1B73D920-5804-11E7-8006-444553540000}</Name>
</SimControls.Map>
<SimControls.Map>
<Name>Saitek Pro Flight Rudder Pedals OBSERVE {1B73D920-5804-11E7-8006-444553540000}</Name>
</SimControls.Map>
<SimControls.Map>
<Name>Saitek Pro Flight Rudder Pedals SIMDIRECTOR {1B73D920-5804-11E7-8006-444553540000}</Name>
</SimControls.Map>
<SimControls.Map>
<Name>Saitek Pro Flight Rudder Pedals CINEMATOGRAPHER {1B73D920-5804-11E7-8006-444553540000}</Name>
<Axis>
<AxName>XAxis</AxName>
<Index>0</Index>
<AxEvent>EYEPOINT_MOVE_LATERAL</AxEvent>
<AxScale>64</AxScale>
<AxNull>64</AxNull>
</Axis>
<Axis>
<AxName>YAxis</AxName>
<Index>1</Index>
<AxEvent>EYEPOINT_MOVE_LONGITUDINAL</AxEvent>
<AxScale>-64</AxScale>
<AxNull>64</AxNull>
</Axis>
<Axis>
<AxName>RzAxis</AxName>
<Index>5</Index>
<AxEvent>EYEPOINT_MOVE_VERTICAL</AxEvent>
<AxScale>64</AxScale>
<AxNull>64</AxNull>
</Axis>
<POV>
<Index>0</Index>
<Down>PAN_VIEW</Down>
<DownRpt>1</DownRpt>
</POV>
</SimControls.Map>
<SimControls.Map>
<Name>Saitek Cyborg Evo Force {15C9DE50-5D1F-11E7-8001-444553540000}</Name>
<Axis>
<AxName>XAxis</AxName>
<Index>0</Index>
<AxEvent>AXIS_AILERONS_SET</AxEvent>
<AxScale>64</AxScale>
<AxNull>36</AxNull>
</Axis>
<Axis>
<AxName>YAxis</AxName>
<Index>1</Index>
<AxEvent>AXIS_ELEVATOR_SET</AxEvent>
<AxScale>64</AxScale>
<AxNull>36</AxNull>
</Axis>
<Axis>
<AxName>RzAxis</AxName>
<Index>5</Index>
<AxEvent>AXIS_RUDDER_SET</AxEvent>
<AxScale>64</AxScale>
<AxNull>36</AxNull>
</Axis>
<Axis>
<AxName>Slider</AxName>
<Index>6</Index>
<AxEvent>AXIS_THROTTLE_SET</AxEvent>
<AxScale>127</AxScale>
<AxNull>1</AxNull>
</Axis>
<Entry>
<Index>0</Index>
<Down>BRAKES</Down>
<DownRpt>1</DownRpt>
</Entry>
<Entry>
<Index>1</Index>
<Down>VIEW_MODE</Down>
</Entry>
<Entry>
<Index>2</Index>
<Down>ELEV_TRIM_DN</Down>
<DownRpt>1</DownRpt>
</Entry>
<Entry>
<Index>3</Index>
<Down>ELEV_TRIM_UP</Down>
<DownRpt>1</DownRpt>
</Entry>
<Entry>
<Index>4</Index>
<Down>FLAPS_INCR</Down>
</Entry>
<Entry>
<Index>5</Index>
<Down>FLAPS_DECR</Down>
</Entry>
<Entry>
<Index>6</Index>
<Down>RELEASE_DROPPABLE_OBJECTS</Down>
</Entry>
<Entry>
<Index>7</Index>
<Down>GEAR_TOGGLE</Down>
</Entry>
<Entry>
<Index>8</Index>
<Down>VIEW_MODE</Down>
</Entry>
<Entry>
<Index>9</Index>
<Down>GEAR_TOGGLE</Down>
</Entry>
<POV>
<Index>0</Index>
<Down>PAN_VIEW</Down>
<DownRpt>1</DownRpt>
</POV>
</SimControls.Map>
<SimControls.Map>
<Name>Saitek Cyborg Evo Force SLEW {15C9DE50-5D1F-11E7-8001-444553540000}</Name>
<Axis>
<AxName>XAxis</AxName>
<Index>0</Index>
<AxEvent>AXIS_SLEW_SIDEWAYS_SET</AxEvent>
<AxScale>100</AxScale>
<AxNull>36</AxNull>
</Axis>
<Axis>
<AxName>YAxis</AxName>
<Index>1</Index>
<AxEvent>AXIS_SLEW_AHEAD_SET</AxEvent>
<AxScale>100</AxScale>
<AxNull>36</AxNull>
</Axis>
<Axis>
<AxName>RzAxis</AxName>
<Index>5</Index>
<AxEvent>AXIS_SLEW_HEADING_SET</AxEvent>
<AxScale>100</AxScale>
<AxNull>36</AxNull>
</Axis>
<Entry>
<Index>0</Index>
<Down>SLEW_RESET</Down>
</Entry>
<Entry>
<Index>1</Index>
<Down>VIEW_MODE</Down>
</Entry>
<Entry>
<Index>2</Index>
<Down>SLEW_ALTIT_PLUS</Down>
</Entry>
<Entry>
<Index>3</Index>
<Down>SLEW_ALTIT_MINUS</Down>
</Entry>
<Entry>
<Index>4</Index>
<Down>SLEW_PITCH_PLUS</Down>
</Entry>
<Entry>
<Index>5</Index>
<Down>SLEW_PITCH_MINUS</Down>
</Entry>
<Entry>
<Index>6</Index>
<Down>SLEW_BANK_MINUS</Down>
</Entry>
<Entry>
<Index>7</Index>
<Down>SLEW_BANK_PLUS</Down>
</Entry>
<Entry>
<Index>8</Index>
<Down>SLEW_FREEZE</Down>
</Entry>
<Entry>
<Index>9</Index>
<Down>SLEW_RESET</Down>
</Entry>
<POV>
<Index>0</Index>
<Down>PAN_VIEW</Down>
<DownRpt>1</DownRpt>
</POV>
</SimControls.Map>
<SimControls.Map>
<Name>Saitek Cyborg Evo Force OBSERVE {15C9DE50-5D1F-11E7-8001-444553540000}</Name>
</SimControls.Map>
<SimControls.Map>
<Name>Saitek Cyborg Evo Force SIMDIRECTOR {15C9DE50-5D1F-11E7-8001-444553540000}</Name>
</SimControls.Map>
<SimControls.Map>
<Name>Saitek Cyborg Evo Force CINEMATOGRAPHER {15C9DE50-5D1F-11E7-8001-444553540000}</Name>
</SimControls.Map>
<SimControls.Map>
<Name>KEYBOARD_MAIN.Civilian Male White Shirt Blue Jeans</Name>
</SimControls.Map>
<SimControls.Map>
<Name>Saitek Pro Flight Rudder Pedals {076306A3-0100-0000-0000-000000000000}</Name>
</SimControls.Map>
<SimControls.Map>
<Name>Saitek Pro Flight Rudder Pedals SLEW {076306A3-0100-0000-0000-000000000000}</Name>
</SimControls.Map>
<SimControls.Map>
<Name>Saitek Pro Flight Rudder Pedals OBSERVE {076306A3-0100-0000-0000-000000000000}</Name>
</SimControls.Map>
<SimControls.Map>
<Name>Saitek Pro Flight Rudder Pedals SIMDIRECTOR {076306A3-0100-0000-0000-000000000000}</Name>
</SimControls.Map>
<SimControls.Map>
<Name>Saitek Pro Flight Rudder Pedals CINEMATOGRAPHER {076306A3-0100-0000-0000-000000000000}</Name>
<Axis>
<AxName>XAxis</AxName>
<Index>0</Index>
<AxEvent>EYEPOINT_MOVE_LATERAL</AxEvent>
<AxScale>64</AxScale>
<AxNull>64</AxNull>
</Axis>
<Axis>
<AxName>YAxis</AxName>
<Index>1</Index>
<AxEvent>EYEPOINT_MOVE_LONGITUDINAL</AxEvent>
<AxScale>-64</AxScale>
<AxNull>64</AxNull>
</Axis>
<Axis>
<AxName>RzAxis</AxName>
<Index>5</Index>
<AxEvent>EYEPOINT_MOVE_VERTICAL</AxEvent>
<AxScale>64</AxScale>
<AxNull>64</AxNull>
</Axis>
<POV>
<Index>0</Index>
<Down>PAN_VIEW</Down>
<DownRpt>1</DownRpt>
</POV>
</SimControls.Map>
<SimControls.Map>
<Name>FFB5 {FFB506A3-0205-0001-D5B5-020000000000}</Name>
<Axis>
<AxName>XAxis</AxName>
<Index>0</Index>
<AxEvent>AXIS_AILERONS_SET</AxEvent>
<AxScale>127</AxScale>
<AxNull>5</AxNull>
</Axis>
<Axis>
<AxName>YAxis</AxName>
<Index>1</Index>
<AxEvent>AXIS_ELEVATOR_SET</AxEvent>
<AxScale>127</AxScale>
<AxNull>5</AxNull>
</Axis>
<Axis>
<AxName>Rudder</AxName>
<Index>7</Index>
<AxEvent>AXIS_RUDDER_SET</AxEvent>
<AxScale>127</AxScale>
<AxNull>5</AxNull>
</Axis>
<Axis>
<AxName>Throttle</AxName>
<Index>8</Index>
<AxEvent>AXIS_THROTTLE_SET</AxEvent>
<AxScale>127</AxScale>
<AxNull>5</AxNull>
</Axis>
<Entry>
<Index>0</Index>
<Down>BRAKES</Down>
<DownRpt>1</DownRpt>
</Entry>
<Entry>
<Index>1</Index>
<Down>VIEW_MODE</Down>
</Entry>
<Entry>
<Index>2</Index>
<Down>ELEV_TRIM_DN</Down>
<DownRpt>1</DownRpt>
</Entry>
<Entry>
<Index>3</Index>
<Down>ELEV_TRIM_UP</Down>
<DownRpt>1</DownRpt>
</Entry>
<Entry>
<Index>4</Index>
<Down>FLAPS_INCR</Down>
</Entry>
<Entry>
<Index>5</Index>
<Down>FLAPS_DECR</Down>
</Entry>
<Entry>
<Index>6</Index>
<Down>RELEASE_DROPPABLE_OBJECTS</Down>
</Entry>
<Entry>
<Index>7</Index>
<Down>GEAR_TOGGLE</Down>
</Entry>
<Entry>
<Index>8</Index>
<Down>VIEW_MODE</Down>
</Entry>
<Entry>
<Index>9</Index>
<Down>GEAR_TOGGLE</Down>
</Entry>
<POV>
<Index>0</Index>
<Down>PAN_VIEW</Down>
<DownRpt>1</DownRpt>
</POV>
</SimControls.Map>
<SimControls.Map>
<Name>FFB5 SLEW {FFB506A3-0205-0001-D5B5-020000000000}</Name>
</SimControls.Map>
<SimControls.Map>
<Name>FFB5 OBSERVE {FFB506A3-0205-0001-D5B5-020000000000}</Name>
</SimControls.Map>
<SimControls.Map>
<Name>FFB5 SIMDIRECTOR {FFB506A3-0205-0001-D5B5-020000000000}</Name>
</SimControls.Map>
<SimControls.Map>
<Name>FFB5 CINEMATOGRAPHER {FFB506A3-0205-0001-D5B5-020000000000}</Name>
</SimBase.Document>
-
RussDirks
- Site Admin
- Posts: 696
- Joined: Sat Sep 13, 2003 1:18 pm
- Location: Chilliwack, Canada
Post
by RussDirks » Tue Dec 05, 2017 6:14 am
Go into P3D settings, under controllers, there are 2 input types: DirectInput and RawInput. What is yours set at? If it is RawInput, change it to DirectInput.
Russel Dirks
Forum Moderator
-
simbiosi
- Posts: 6
- Joined: Mon Dec 04, 2017 9:48 pm
Post
by simbiosi » Tue Dec 05, 2017 10:42 pm
Ok I change to direct and is not asking any more about the joystick.
On Ball.
thank's