Realair Duke v2 P3D
Moderator: RussDirks
Realair Duke v2 P3D
I just purchased this aircraft and in reading the manual it said it correctly models the trim tab and elevator forces. Is there away to try thes out with FS Force! I assume if I select FSX for trim control in FS Force manager, I would get the standard fsx and not the Realair version? Can FS Force see the Realair trim?
Re: Realair Duke v2 P3D
Are you sure that's not just marketing <you-know-what>? Post the section from the manual here so I can read it.
Russel Dirks
Forum Moderator
Forum Moderator
Re: Realair Duke v2 P3D
This is what I read from the flying manual.
When you add up trim, not only does the elevator trim-tab move down, the elevators deflect
upwards and the control yokes moves aft. This effect is speed sensitive just like in real life - for
example at standstill you’ll see no control surface or yoke movement, only the trimtab will move.
The ailerons and rudder respond in the same way.
When you add up trim, not only does the elevator trim-tab move down, the elevators deflect
upwards and the control yokes moves aft. This effect is speed sensitive just like in real life - for
example at standstill you’ll see no control surface or yoke movement, only the trimtab will move.
The ailerons and rudder respond in the same way.